TRAN 71000: Aircraft Design Report - Engineering Assignment Help

Assignment Task

Module Learning Outcomes for this Assignment

• Demonstrate a deep systematic understanding of the application of subsonic
• and supersonic aerodynamics to the design of modern passenger aircraft Demonstrate critical awareness of the application of aerodynamics to the
• design of helicopters Critically appraise modern flight deck design, the differences and similarities  
• and advantages and disadvantages between Airbus and Boeing flight deck design philosophies Demonstrate a comprehensive understanding of human factors and its  
• application to aircraft design and operation

Aircraft Design Report

In this coursework, you are required to submit a technical report based on the aircraft design work that you have done within the given timeline (6 weeks). During this coursework, you need to design an aircraft that best answers the design question.

The following requirements are set for the aircraft design report:

Design an aircraft that will transport 200 passengers and their associated baggage (Max. Take-off Weight should not be more than 80000 Kg) over a design range of 9000 km at a cruise speed equal to or better than existing competitive services.

Relevant design calculations need to be done for the chosen aircraft configuration. Submit the technical report in the below mentioned template.

Summary

1. Introduction (configuration selection using literature review)

2. Initial Sizing and Layout

2.1 Engine size and selection

2.2 Wing geometry

2.3 Fuselage geometry (with initial seating arrangement drawing)

2.4 Flight-deck selection

3. Initial Estimates

3.1 Empty weight

3.2 Payload weight

3.3 Fuel weight

3.4 Maximum take-off weight

4. Initial Performance Estimates

4.1 Lift estimation

4.2 Drag estimation

4.3 Take-off thrust estimation

4.4 Take-off runway distance estimation

4.5 Range estimation

4.6 Cruise speed

5. Pre-liminary Sketch

6. Conclusion

7. Bibliography / References

The aircraft design report must include all the above-mentioned tasks. You are allowed to add more technical sections/calculations/elements to your report, if required. You are not allowed to use the works of your peers in the report. A maximum of 4 tables/images are allowed in this report.

This TRAN 71000 –Engineering Assignment has been solved by our Engineering Experts at My Uni Papers. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing Style. Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered.

You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turn tin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.