Network Topology for Networking Industry Case Study IT Assignment Help

Assignment Task

Task 1

Part 1: Set Up the Network Topology (Ethernet only)

Identify cables and ports for use in the network.

Cable a physical lab topology.

Part 2: Configure PC Hosts

• Enter static IP address information on the LAN interface of the hosts.
• Verify that PCs can communicate using the ping utilit

BACKGROUND / SCENARIO

Networks are constructed of three major components: hosts, switches, and routers. In this lab, you will build a simple network with two hosts and a wireless router with at least two switch ports. You will apply IP addressing for this lab to the PCs to enable communication between these two devices. Use the ping utility to verify connectivity

PART 1: SET UP THE NETWORK TOPOLOGY (ETHERNET ONLY)

In Part 1, you will cable the devices together according to the network topology.

Step 1: Power on the devices.

Step 2: Connect the PCs to the switch.

Step 3: Visually inspect network connections.

PART 2: CONFIGURE PC HOSTS

In this lab, all the network configurations are done on a Windows 10 PC.

Step 1: Configure static IP address information on the PCs.

Step 2: Verify PC settings and connectivity.

Task 2`
Part 1: Configure Basic Device Settings

Part 2: Configure Basic Security Measures on the Router

Part 3: Configure Basic Security Measures on the Switch

BACKGROUND / SCENARIO

It is recommended that all network devices be configured with, at least, a minimum set of best practice security commands. This includes end user devices, servers, and network devices, such as routers and switches.In this lab, you will configure the network devices in the topology to accept SSH sessions for remote management. You will also use the IOS CLI to configure common, basic best practice security measures. You will then test the security measures to verify that they are properly implemented and working correctly.Note: The routers used with CCNA hands-on labs are Cisco 1941 ISRs with Cisco IOS Release 15.2(4)M3 (universalk9 image). The switches used are Cisco Catalyst 2960s with Cisco IOS Release 15.0(2) (lanbasek9 image). Other routers, switches and Cisco IOS versions can be used. Depending on the model and Cisco IOS version, the commands available and output produced might var

This IT Assignment has been solved by our IT Experts at My Uni Papers. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.
    

Be it a used or new solution, the quality of the work submitted by our assignment Experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.