MECH4880 - Refrigeration and Air Conditioning Assignment

Assignment Task

Problem Statement

A client has commissioned your company to conduct aheat load analysis and design the HVAC system for a 2-storey shopping centre, as described in the attached project specifications and drawings. Your manager has tasked you with calculating the cooling and heating loads and performing preliminary duct design and unit selection for a section of the building. This assignment is divided into two parts: Part A and Part B. To submit Part B, students must have already submitted Part A.

When submitting Part B, combining it with Part A is unnecessary, but keeping a copy of the combined document yourself is highly recommended. This combined document (A-B) will be valuable for presenting your experience from the coursework to the industry, such as in future job interviews. A professional report should be submitted for each part. The report shall include an executive summary (with a tabulated summary of results), introduction and conclusion. Figures and tables shall be appropriately captioned.

A consistent referencing system shall be used throughout (e.g., IEEE or Harvard). The report shall include a contents page, a list of figures and a list of tables. The body of the report should be organised in a logical and coherent fashion. The helper document provides a useful guideline for organising the body of the report; the headings/order should be followed but may be adjusted, and the list is not exhaustive. Writing should be concise and to the point, avoiding superfluous information or repetition of content. The report should be formatted neatly to allow information to be conveniently extracted. Each part of the assignment will have a maximum limit of 25 pages. This limit does not include appendices. However, you should assume that the marker will not mark anything in the appendices. The following documents should be used in conjunction with this overview:

Part A 

Section A1

This section requires students to implement the heat load calculation methodology outlined in AIRAHDA09. A detailed manual heat load calculations for the Gym (NoTime Fitness) must be performed and reported for summer and winter. Reporting must include (but not limited to) the following items:

(1) Design Day Selection and Specification Comprehension

(2) External Loads – Wall Specifications

(3) External Loads – Solar Transmission

(4) External Loads – Partitions

(5) External Loads – Winter 2

(6) Internal Loads – Summer

(7) Internal Loads – Winter

(8) Cooling and Heating Load Summary

(9) Psychrometrics (Summer only)

Section A2

This part requires students to compare their hand calculations for the gym with the cooling and heating load simulation produced by CAMEL software. (Note: the results for the CAMEL simulation are provided. Students are not expected to complete the simulation on CAMEL but to discuss the results). Ensure that you follow the assignment helper as it details the minimum that is expected from each submission.

Part B 

Section B1

This part requires students to report and summarise the cooling and heating load calculations for the entire building using the CAMEL heat load simulation provided. The submission should include (but not limited to) the following elements:

(1) Produce conditioned/ventilated space maps

(2) Ventilated space calculations

Section B2

This part requires students to further build upon the previous part by conducting pressure loss calculations on duct runs to determine required fan parameters. Other equipment, such as AHUs, will also be selected before concluding the report with sustainable design considerations. The submission should include (but not limited to) the following elements:

(1) Air schematics

(2) Duct Design

(3) Pressure loss calculations (Ventilated spaces only)

(4) AHU selection

(5) Building improvements and sustainable design

This MECH4880 - Engineering Assignment Help has been solved by our Engineering Experts at My Uni Papers. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.