ENGT5155: Design and Manufacturing of Quadcopter Using Principles of Digital Manufacturing - Engineering Assignment Help

Assignment Task:

Task:

The learning outcomes that are assessed by this coursework are:
1. Understand the different processes of product development through digital manufacturing
2. Ability to use design optimization techniques using appropriate software for digital manufacturing
3. Ability to generate machine codes for 3D printing machines
4. Understand the application of automation in digital manufacturing

Section 1: Introduction (10% marks):
Provide a suitable background and discuss the following that can be used for the development of the quadcopter (model provided in the last page of this document) through digital manufacturing.

 Computer aided Design/Engineering
 Topology optimization (pros and cons)
 Hierarchy diagram for manufacturing processes.
 Manufacturing support system/s.
 Design / draw a layout of material handling systems.

Section 2: Design optimization of quadcopter body (20% marks):
This is an individual activity to optimize the body through topology optimization feature in ANSYS Workbench. Show your steps with figures and appropriate reasoning. Compare the topology optimized part with the original design.

Some advice and considerations:
- You’ll be using PLA filaments as material for this part. The material properties of you’ll need for the design include Yong’s (elastic) modulus of 3500MPa, Poisson’s ratio of 0.35, ultimate strength of 65MPa and density of 1.24 gr/cm 3 .
- Design the quadcopter body for a total lifting load of 1kg.
- To save computational cost, you can optimize only a quarter of the quadcopter frame (only one arm) as it is a symmetrical body. Then generate the full design after optimizing one arm through reparative pattern in ANSYS Space Claim.
- You can use both Density-based (SIMP) and Level-set method for topology optimization. However, your final design should be at a final stage ready for 3D printing, i.e. you’ll need to do any post-processing required such as smoothing using ANSYS Space Claim or any similar software before finalizing your design
- You’ll also need to demonstrate validity/optimality of your design through an appropriate method/reasoning.
- Note that in the next task, the optimized part will not be printed as solid, but an infill density of 5-30% will be applied in 3D printing the optimized body.

Section 3: FDM process for 3D printer quadcopter parts (15% marks):

Part (a): quadcopter body (10 marks)
- Proceed with your selected design to prepare the G-code for 3D printing throughs FDM process.
- Generate G-code for 3D printing the body using Prusa Slicer software (check that the machine
settings in the software match the Prusa printer you are going to book in Workshop).

Part (b): Camera gimbal, motor mounts and propellers (5 marks)
- Import the STL files of the Camera gimbal, four motor mounts and four propellers, all together into the Prusa Slicer software. Consider slice thickness of 0.15mm and solid in-fill (100%density). Arrange the parts in appropriate location and orientation.
- Show figures of the final sliced model including support structures. The figures should show the arrangements of the parts within printer build environment. Explain the reason for your choice of part arrangement.
- Show a screenshot of Sliced Info (bottom right corner of the screen when sliced model is generated which shows print time, material usage, cost …).
- State and explain pros and cons of FDM process for manufacturing these parts.

Note: you don’t need to 3D print the parts related to part (b).

Section 4: Re-design the landing pad using lattice structure infill (10% marks):
- Use ANSYS Space Claim or any appropriate similar software to re-design the landing pad by applying lattice structure in-fill.
- Justify your choice of lattice structure in-fill, shell thickness and other design considerations related to this task including an appropriate manufacturing process you would recommend.
- Include pros and cons of your recommended process for manufacturing the lattice landing pad.

Section 5: Alternative processes for fabrication of quadcopter parts (15% marks):

Part (a): Additive Manufacturing processes (10 marks)
In addition to the material extrusion (e.g. FDM), there are many other processes for additive manufacturing which can be classified into 7 main processes (refer to relevant lecture slides).

Explain which other processes can be used for fabrication of the quadcopter parts designed/presented in sections 2-4. Consider different factors such as choice of material, size, resolution, cost, design complexity and support structure requirement, etc. include pros and cons of each process.

Part (b): Subtractive manufacturing and net shape manufacturing (5 marks)
Comment on the suitability of subtractive manufacturing and net shape manufacturing for the fabrication of the presented quadcopter parts. Include pros and cons of the methods in relation to the parts.

Section 6: 2D cutting optimization/Nesting (10% marks):
Import (provided on Blackboard) the files of the Battery and electronic equipment box as well as camera gimbal mounting plates (there should be 7 parts in total which can be organized to optimize their cutting plan together/simultaneously) in any appropriate CAD software that can be used to draw and export 2D drawings e.g. AutoCAD, Solidworks, Space Claim (ANSYS) etc.

Apply 2D Nesting on the 2D parts of thickness 1.0mm. Explain the reason for your choice of parts arrangement for 2D cutting. Show figures of the final drawings and optimized model (appropriate cutting plans). Find the total rectangular area required to extract given parts based on your optimized cutting plan.

Section 7: Automation (10% marks):
State and explain the different types of automated manufacturing processes for the parts selected in sections 2-6 that includes:
- Digital assembly practices its types e.g. Assembly line, conveyor belts to streamline the digital manufacturing process. Organize the assembly process in clear steps and show appropriate plan, layouts or diagrams.
- Apply cellular and group technology on the digital manufacturing processes to improve productivity.

Section 8: Sustainable manufacturing and AI (10% marks):
(a) State and explain the sustainable manufacturing processes for the parts presented in sections 2-6.
 Briefly comment on the sustainable manufacturing and its significance these days.
 Identify and justify the manufacturing processes which are sustainable and comment on why sustainable manufacturing is preferred over normal/conventional manufacturing.

(b) Artificial Intelligence (AI)
 State and explain the role of artificial intelligence in the digital manufacturing processes.
 Identify and assign to the presented quadcopter parts, design, manufacturing, and assembly processes in which AI can play an important role.
 Explain how we can use AI in quality assurance of the manufactured/assembled quadcopter.

This  ENGT5155 : Engineering Assignment has been solved by our Engineering Experts at My Uni Papers. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.